Customized Miniature Display - 18 x 11" FREE SHIPPING

This Miniature Display case is made from laser-cut maple plywood (1/4" thick) with a laser-cut personalized banner, adornments laser-cut from maple and doors, columns, and other decorations cut from walnut.

*** The display comes unassembled ***

Email your name or message for the banner in the NOTES section during checkout.

The dimensions are 18" wide by 11" tall and the display consists of four levels that are approx. 2.5" tall and 17.5" wide, more than enough to hold up to 40+ 28-32mm miniatures with bases. Each of the four floors in the display is 2" deep, and the case will not tip over easily on a desk.

Assembly instructions are at the end of this description.
The display comes with the following accessories and FREE SHIPPING:

* 10x Wood Adornments - laser-cut mahogany (4x corner pieces, 6x middle row edges)
* 1x Banner - laser-cut maple with YOUR MESSAGE engraved (it is glued to top front edge as shown in photos)
* 8x Doors - laser-cut walnut
* 4x Columns - laser-cut walnut
* 4x Wall Banners - laser-cut walnut
* 2x Knight Statues - laser-cut walnut
* 2x Shields - laser-cut walnut

Please Note: This display does not come with miniatures. The 28mm miniatures in the photo are provided for scale. The display is also light enough to be attached to a wall with two or three 3M Command Strips while holding up to 40+ miniatures.

Basic Assembly Instructions:

The Miniature Display can be assembled with glue and the notched edges provide a sturdy structure.

1. Place back on flat surface and glue in three shelves and top and bottom pieces.
2. Once shelves and top and bottom glue has dried, glue on left and right side pieces.
3. Doors, Knight Statues, and other decorations can be glued in place as desired.
4. Four triangular corner pieces glued into four corners.
5. Six small shield-like pieces glued over seams of right and left shelves where they meet left and right walls.